Coin Door Wiring

N1kolai

New member
Joined
Jul 1, 2010
Messages
16
Reaction score
0
Location
Indiana
Hi guys, I'm trying to wire COIN 2 independently from COIN 1 and I'm aware that I need to run wires from the mechanism to 16 and T on the JAMMA harness.. I'm just not that familiar with the general wiring of the coin door and was wondering if you know of any online diagrams (non schematic) or pictures that demonstrate how to do this?

Thanks!
 
You should be able to do this if you follow the coin door wiring back to the molex connection.
Find out where exactly the coin 1 and coin 2 wires are on the molex.
You'll need to find those as well as a ground for each of the coin 1 and coin 2 wires.
Other than that the coin door should have wiring for the +5V for the coin door lights and a field ground wire that grounds to the cabinet.
Normally the field ground wire is green, the normal grounds are black and the +5V are solid colors usually their red to my knowledge.
What is left should be your coin 1 and coin 2 wires.
 
Back
Top Bottom