Coin Door Lights

bradp56

New member
Joined
Jan 25, 2010
Messages
523
Reaction score
0
Location
Baldwin, Maryland
I have a MS pac converted to Jamma. Whoever did this left a lot of the old cables laying around anyway everything works fine except for the coin door lights. I just need to know what wire is used for the lights and if its from the Jamma harnes or the power switcher? I replaced the bulbs first and nothing, they are wedge lights.

Thank you;

Brad
 
They are powered from your switcher. If your using any of the smaller Jamma boards like the 60-in-1 or the arcadeSD, then be sure to use the 5v so you have a decent load for the switcher to run.
 
Back
Top Bottom