Cobra Command(Laser) Overlay Help Needed

Gamer4Life

Member
Joined
Jul 16, 2009
Messages
459
Reaction score
18
Location
San Marcos, California
Ok I am installing a single board conversion into a extra DL cab I have. I just need some help with getting the overlay to work right. I have a impose board from a Intersteller that will only work with a matushshita monitor. I know people have used a G07/Wells monitors to do this conversion. I just need to know how they did it. I tired using a Badlands overlay set up and have come close. I get all the overlay, but its just the outline and the rest of the screen is blue, and you can see all the video inside where the overlay is. Its kinda had to explain take a look at the pics and see what I mean. I have the option of G07 or a Wells monitor to set this up on. Any help would be great. I so close to getting this complete its killing me!
 

Attachments

  • 2011-02-11_17-35-23_257.jpg
    2011-02-11_17-35-23_257.jpg
    103.4 KB · Views: 15
  • 2011-02-11_17-35-34_514.jpg
    2011-02-11_17-35-34_514.jpg
    98.1 KB · Views: 15
  • 2011-02-11_17-35-53_335.jpg
    2011-02-11_17-35-53_335.jpg
    100.5 KB · Views: 14
Last edited:
that little overlay board you have piggy backed on the video board is a cliffy to cobra command vmb board while this board will work for what you are trying to achieve the results suck. the board will fall in and out of sync with the ldv-1000 because its made for the 8210
 
Back
Top Bottom