CNC Cabinets: new website in the works (self promo)

[mungrin]

i would definitely take a few cabs if they were coming from ny!..let me know if this ever happens. Also, would you ship these cabs unassembled? I really dont have the skills/space to cut the wood for these kits..but i can definitely assemble them.

Thanks
jason

me tooooooo!!!!!!!!!!!!!!!!!!!

 

[Malice95]

May have an eastern pa klover getting into the cnc cab business soon, I'm sure the NY guys will love it!

OOOWWWhhhh Either NY or eastern PA. I'd be interested if I can drive to
pick one up.

 

[DPtwiz]

The pa Guy is coming to my place soon, so I can show him the cnc and what it takes to make cabinets. I know he has got a ship quote from the cnc manufacturer, so he is definately serious.

 

[mungrin]

This could be huge!

 

[OU Flight]

ah interesting, lets say I picked 3 upright cabinets in the 3-350 range How much would that be roughly (very rough) cost to ship to 10016

Sorry I missed this to relply back some how. I looked it up and it looks like to ship 3 cabinets flat stacked its going to be about $750. Compared to shipping a single one assembled at $400. We may be about to ship them all assembled through NAVL for about $800. I can check this week if you want to go that route.

Thanks,
Joe

 

[OU Flight]

I am finishing up my current orders now and really need some more cabinets to build. Let me know if I can get some brand new cabinets out to anyone.

Thanks,
Joe

 

[mungrin]

Can you make something like this?

http://www.mikesarcade.com/cgi-bin/store.pl?sku=CABMWMINI

Or this
http://www.mikesarcade.com/cgi-bin/store.pl?sku=CABMIDWAYUR

 

[TERMINATOR]

What about customizing? For instance, I have a Speed Buggy UR, The cab is badly water damaged all around the bottom and I thought about putting it into a Pole Position 1/2 Cockpit but the gas pedals are wrong for Speed Buggy which operates from the top with a shaft instead of from underneath like PP 1/2. I also considered the same with a Chase HQ UR I have that the previous owner actually broke in half and bolted it back together with brackets. Maybe you could build a cockpit that's a little taller and make a space for the marquee above the monitor bezel with it's flashing lights. It would be set up just like an UR in a sit down cockpit. They also both need the squre hole on the CP for the shifter where PP1/2 has the round one but that's all sheet metal.

 

[Unstupid]

Tell us more about your CNC machines!

 

[Meph]

The pa Guy is coming to my place soon, so I can show him the cnc and what it takes to make cabinets. I know he has got a ship quote from the cnc manufacturer, so he is definately serious.

PA would be great. Close enough to NY for pickup. Keep us updated.

 

[OU Flight]

Can you make something like this?

http://www.mikesarcade.com/cgi-bin/store.pl?sku=CABMWMINI

Or this
http://www.mikesarcade.com/cgi-bin/store.pl?sku=CABMIDWAYUR

Sure I can do the Midway uprights like the second link.

 

[OU Flight]

What about customizing? For instance, I have a Speed Buggy UR, The cab is badly water damaged all around the bottom and I thought about putting it into a Pole Position 1/2 Cockpit but the gas pedals are wrong for Speed Buggy which operates from the top with a shaft instead of from underneath like PP 1/2. I also considered the same with a Chase HQ UR I have that the previous owner actually broke in half and bolted it back together with brackets. Maybe you could build a cockpit that's a little taller and make a space for the marquee above the monitor bezel with it's flashing lights. It would be set up just like an UR in a sit down cockpit. They also both need the squre hole on the CP for the shifter where PP1/2 has the round one but that's all sheet metal.

That would be possible, except for the fact that I don't have the plans for any of those cabinets. If I had a Pole Position to copy, then we could make adjustments from there.

 

[mungrin]

Sure I can do the Midway uprights like the second link.

Perfect. For how much?

 

[DPtwiz]

350.00 for galagas in black melamine. I'm in Ohio, a little closer than joe. We do work together on these, if people live closer to him, I try and pass people over to him

 

[mungrin]

350.00 for galagas in black melamine. I'm in Ohio, a little closer than joe. We do work together on these, if people live closer to him, I try and pass people over to him

Sounds great. How much is shipping to 10304. Do you do cocktails?

 

[DPtwiz]

i let buyers set up shipping. i get aggrivated every time i try to get a quote lol. I do cocktails, yes.