Cloak & Dagger Repro (Defender conversion) Control Panel & CPOs on the way!

Update!

As of yesterday afternoon, I now have finished powder coated panels in my possession, woot!

A few more sneak peeks:

attachment.php


attachment.php


attachment.php


attachment.php


I plan to send sample out today to TOG for test fit to CPOs, then still shooting for estimated date to have those in my hands by 02/22/18.

For all those that have on list for CP only, I will be sending out PMs soon. I'm shooting for getting those packed and shipped starting this Saturday 02/03/18.

Getting there!

:)

-GackAttack
 

Attachments

  • CnD_CP_Sneak Peek_08.JPG
    CnD_CP_Sneak Peek_08.JPG
    173.4 KB · Views: 164
  • CnD_CP_Sneak Peek_09.JPG
    CnD_CP_Sneak Peek_09.JPG
    91.8 KB · Views: 163
  • CnD_CP_Sneak Peek_10.JPG
    CnD_CP_Sneak Peek_10.JPG
    103 KB · Views: 164
  • CnD_CP_Sneak Peek_11.JPG
    CnD_CP_Sneak Peek_11.JPG
    109 KB · Views: 162
Last edited:
and payday is tomorrow, how convenient

PM headed your way sir. FYI - I'm looking for another tested/working DK PCB for a new project I'm planning to reveal at CAX in July ;)

A couple bonus items I decided I want to include with each Control Panel purchase:

attachment.php


In the baggie is a foam gasket tape similar to original panel, which basically sandwiches between the upper backside of CP and bezel. And 8pcs each washer/lock washer/nut to attach joystick bases on threaded studs:

attachment.php


:)

-GackAttack
 

Attachments

  • CnD_CP_Sneak Peek_12.JPG
    CnD_CP_Sneak Peek_12.JPG
    185.1 KB · Views: 147
  • CnD_CP_Sneak Peek_13.JPG
    CnD_CP_Sneak Peek_13.JPG
    149.1 KB · Views: 147
PM headed your way sir. FYI - I'm looking for another tested/working DK PCB for a new project I'm planning to reveal at CAX in July ;)

A couple bonus items I decided I want to include with each Control Panel purchase:

attachment.php


In the baggie is a foam gasket tape similar to original panel, which basically sandwiches between the upper backside of CP and bezel. And 8pcs each washer/lock washer/nut to attach joystick bases on threaded studs:

attachment.php


:)

-GackAttack
Gack is da man!
 
now all we need is a FPGA board with cloak and dagger on it to make this conversion a breeze haha.
 
now all we need is a FPGA board with cloak and dagger on it to make this conversion a breeze haha.

No doubt, haha!

I recently sent a request to add this to BitKit, fingers crossed maybe....just MAYBE at some point :D

No shipping outside US?

Thanks for asking, I've updated my first post for better clarity, it used to say:
"$XX/pc + $XX shipping (USA only, send PM for pricing)"

I've updated to:
"$XX/pc + $XX shipping (USA only, send PM for pricing outside of USA)"

I can offer shipping outside USA, just need details from you to get proper pricing together. Please send me PM with shipping location details and I will get you pricing :)

Awesome!! Looking great man

Thanks!

TOG should be receiving sample panel today, so hopefully I can get the CPOs in my hands by estimated date of 02/22/18.

-GackAttack

P.S. Also note there only a few more left, so don't hesitate to order as I'm not sure when next time I may run anymore....

- LIMITED PARTS LEFT (after other orders filled) AS OF 02/05/18 -
Control Panel Only: 8
Combo Control Panel w/CPO: 6
 
The panel came out great! Thank you so much for doing a run of these!!

After getting my CPO from Rich several months ago, I was excited to finally have a CP to put it on. Woot!! (Ignore the fact that the CP is not fully populated yet . . . I just wanted to show how great the panel looks!)
 

Attachments

  • 85436e5d-472e-4bfb-aa85-2a6a8fc84ca8.jpg
    85436e5d-472e-4bfb-aa85-2a6a8fc84ca8.jpg
    214.1 KB · Views: 65
  • ddb4682d-045c-49be-bdc7-8cb8c6882375.jpg
    ddb4682d-045c-49be-bdc7-8cb8c6882375.jpg
    142 KB · Views: 57
Update!

After a couple setbacks on CPO production, I just received a couple teaser pics with test fit :)

attachment.php


attachment.php


With any luck, these will be in my hands in a couple days. Once they are in my hands, I'll be sending out PMs to everyone on the list. If all goes well, I'll start shipping out later this week!

-GackAttack
 

Attachments

  • CnD_CP_Sneak Peek_14.JPG
    CnD_CP_Sneak Peek_14.JPG
    176.8 KB · Views: 187
  • CnD_CP_Sneak Peek_15.JPG
    CnD_CP_Sneak Peek_15.JPG
    146.4 KB · Views: 186
After a couple setbacks on CPO production, I just received a couple teaser pics with test fit :)

attachment.php


attachment.php


With any luck, these will be in my hands in a couple days. Once they are in my hands, I'll be sending out PMs to everyone on the list. If all goes well, I'll start shipping out later this week!

-GackAttack

Looks great, good thing i get paid friday!
 
Just wanted to do a little update. After a couple delays, CPOs are done, on route, and scheduled to deliver to me tomorrow 03/13/18 - yay! :D

Timing is a little off right now, on Thursday 03/15/18 I'm heading to San Diego NATT and Arcade Expo 4.0 on Saturday. As result, most likely the earliest I will be able to ship out the CP/CPO orders will be the following Saturday 03/24/18. Hopefully this isn't causing any issues with getting your machines finished up - but soon they will be out :)

I will begin working on sending out payment info to all on the list as soon as I receive the CPOs. Then please make payment prior to scheduled ship date of 03/24/18.

Thanks all - and I'm looking forward to getting on to the next repro project!

-GackAttack
 
Got the CPOs in yesterday - woot!

I'll be sending PMs here shortly to all on the list...

attachment.php


attachment.php


Sneak peek at what most likely will be my next CP run, basically the same panel as the Cloak & Dagger, but as a Defender conversion Williams Multi :)

attachment.php


-GackAttack
 

Attachments

  • CnD_CP_Sneak Peek_16.JPG
    CnD_CP_Sneak Peek_16.JPG
    150.3 KB · Views: 152
  • CnD_CP_Sneak Peek_17.JPG
    CnD_CP_Sneak Peek_17.JPG
    175.9 KB · Views: 148
  • CnD_CP_Sneak Peek_18.JPG
    CnD_CP_Sneak Peek_18.JPG
    168.5 KB · Views: 152
Okay - just shipped out of the remaining current orders that have been paid for. :)

I'll send PMs to those with tracking info.

I will be looking at making some custom boxes next time around - these took a bit of work to cut down to size. I spent over 2 hours last night packing these :eek:

attachment.php


Woot!

-GackAttack
 

Attachments

  • CnD_CP_Sneak Peek_19.JPG
    CnD_CP_Sneak Peek_19.JPG
    395.1 KB · Views: 135
Shipped out another combo today :)

- LIMITED PARTS LEFT AS OF 04/19/18 -
Combo Control Panel w/CPO: QTY 4 LEFT
Control Panel Only: QTY 12 LEFT


I'll be starting on next panel design soon. Kind of unexpectedly over the last 6 weeks or so, the wife and I decided to put our house up for sale for various reasons to get new house...including a game room for me INSIDE! :D - We sold our house last week and signed agreement for new place, which will be ready by sometime in July. After getting settled in new place, the plan will be to get a workshop area in garage for doing more projects like this...so fingers crossed I'll have some more fun stuff to offer in the near future :)

Woot!

-GackAttack
 
Bump....

Just had someone PM me about getting some, so figured might be a good time to bump this thread :)

I've sold a couple (and probably at least one more going out) since my last post here. I'll check inventory this evening, but my estimate on what is in stock and ready to ship as of today 02/04/20:


Combo Control Panel w/CPO: ONLY 1 OR 2 LEFT
Control Panel Only: ABOUT 8PCS LEFT


Prices are as follows:

1pc Control Panel only, $65/pc + $20 shipping (USA only, send PM for pricing outside of USA)
2pc Control Panel only, $125 ($62.50/pc) + $25 shipping (USA only, send PM for pricing outside of USA)

1pc Control Panel w/CPO, $100/pc + $20 shipping (USA only, send PM for pricing outside of USA)
2pc Control Panel w/CPO, $195 ($97.50/pc) + $25 shipping (USA only, send PM for pricing outside of USA)

________________________________________________

The last year and a half has been busy for me since moving. Planned game room inside house (about 250sq ft) wound up turning into my son's bachelor pad, LOL. So only a few months after moving, the 3 car garage w/11ft ceiling has been slowly getting converted to my new 600sq ft arcade :D. I've got lots of new stuff coming out soon that has 'been in the works' for the last year+ and I'll be posting a new thread when those products are getting close to ready to ship. With help from my good man 34k, these products are coming out under the 'GackBuilt' brand. Please follow on Instagram and Twitter for updates, you can also e-mail me at [email protected]

For now, I'd like to mention the other stuff already in works and available soon. A few of these first products I already have produced, but not ready to sell until I wrap up the last few finishing touches. First batch of the following coming soon:

1. Cloak & Dagger (for Defender style cabinets) repro control panels AVAILABLE NOW

Bally / Sente SAC-1B repro control panel inserts:

Sneak peek here https://forums.arcade-museum.com/showpost.php?p=4053332&postcount=125

2. Chicken Shift
3. Snake Pit
4. Mini Golf

Full size custom marquee (shallow depth sheet metal enclosure) light boxes, note that there are several marquees from that style cabinet that are same size (for example Donkey Kong also is DK Jr., DK3, Vs., etc.):

5. Dig Dug
6. Donkey Kong
7. Discs of Tron
8. Pac Man
9. Robotron
10. Tron
11. Wacko
12. Zoo Keeper

Other light boxes in works:

13. Custom Pole Position light box topper (prototype shown at CAX last year). Sneak peek here: https://twitter.com/i/status/1157004464420638720
14. Pinball translight wall mount light box (same style enclosure as marquees above).

A few other fun stuff in the works, but not quite ready to show that stuff yet ;)

Woot!

-GackAttack

IJTHqLJi_400x400.jpg
 
Back
Top Bottom