FS Parts: Clearing out PCB's and Power Supplies

TheBasement

Well-known member
Joined
Feb 22, 2008
Messages
2,729
Reaction score
341
Location
Warrenton, Missouri
Rating - 100%
18   0   0
I have a mixture of PCB's and power supplies for sale. Some are tested, some are not. The power supplies are not tested and some are missing an obvious chip so assume not working and for repair. I am clearing out some shelf space and just want this stuff gone. Just make me a reasonable offer on any of it, several boards or all of it and its yours.

Neo Geo MVH Slot 1B1 (Jamma) Gets crosshatch screen with 1 dip switch, gets Work RAM test with another dip switch, no cartridge so I cannot fully test, this one is a mini form factor
Neo Geo MVH Slot 1F (Jamma) Not working
Neo Geo MV2F (Jamma) Not working, 2 slot with metal cage
Midway Power Supply A082-90412-B000 (Has Tron etched on the bottom of the board)
Midway Power Supply A080-90414-C935
Bally Solenoid Driver AS-2518-22
Mylstar Power Supply GV-109UR
Midway Power Supply A082-90400-H000 (tan)
Midway Power Supply A082-90400-H000 (green)
Foxtronix PCB 40-10002 Rev C
Time Killers PCB (Jamma) – Not Working
Two Crude PCB (Jamma) – Not Working
Unknown PCB (pictured bottom left) Mitsubishi Electric chips on board

ps1.jpg


ps2.jpg
 
Last edited:
Back
Top Bottom