Cleaning Smoked Acrylic Plexi (Punchout PC-10)

schoeps

Member
Joined
Sep 4, 2010
Messages
362
Reaction score
15
Location
Maryland
Before I use Novus or Briallianize on my plexis, I was wondering if any of you have tips on cleaning the screens. Should I mask off the bezel with paper tape or will that pull the paint off?

Thanks so much!
Bri
 
bri,

did you get an answer to this? i want to clean my plexi as well. let me know if you get any replies or if you have cleaned it and how it turned out, what you used, etc. thanks.

d
 
Hey!

I am going to try Novus on the scratches and brillianize for general cleaning and I will post the results! Time to TOFTT!

Bri
 
just to followup, the novus worked great! If the damage was rated on a scale from 1-10, pre cleaning a 1 and brand new a 10, I would say it was about an 8. I took pics, but they came out terrible. I'll attach them so you all can laugh at my poor photo documentation.
 

Attachments

  • photo-1.jpg
    photo-1.jpg
    96.1 KB · Views: 28
  • photo-2.jpg
    photo-2.jpg
    95 KB · Views: 24
  • photo-4.jpg
    photo-4.jpg
    90.9 KB · Views: 26
Was it Punch-Out that had the single sheet of plexi? My Playchoice has two sheets of smoked glass.

They are both factory and a single piece of smoked plexi with about a 10-15deg bend in the middle. They also have a black mask painted on fwiw.
 
Back
Top Bottom