Circus Charlie Pcb and a lot of other items

dj dns

Well-known member

Donor 2015
Joined
Jan 1, 2008
Messages
8,945
Reaction score
396
Location
Dallas, Georgia
Rating - 100%
716   0   0
Items I'm looking for:

Circus Charlie Pcb working

Other I need:
1. Taito raised letter coin door
2. Cinematronics raised letter coiin door
3. 60 in 1 multiboard
4. Sega Naomi Universal Control Panel http://www.flickr.com/photos/djdns/4303460985/
5. Track & Field Cocktail Detachable Elevation Base (makes machine sit higher)
6. Clay Tempest Multi-kit
7. Wild Western Marquee
8. Tapper PCB
9. Timber (PCB / Marquee)
10. Track & Field PCB
11. Sammy Atomiswave (Short Shot Guns)
12. Playchoice 10 sideart
13. Taito Classics to Jamma Adapter
14. Galaga Cabinet to Jamma pcb
15. Circus Charlie side art
16. Nice Star Castle cabinet
17. Dedictaed Tekken 5 Game
 
15. Circus Charlie side art

This is not available - yet. I'll be working on it eventually.

Also, do NOT buy the CC cpo from MameMarquees. It's got a lot of issues. My fault for buying it, and not checking to make sure it was accurate. It's made from a bad file that's on the artwork sites. Eventually I'll be redoing that, too...
 
I would probably never buy a cpo for mame marquees again. I bought two different cpos for my other machines and wish I would have just left the original one on. The new one for mame marquee looked worst than the scratched up and peeling one I had to begin with, but it was to late because I already stripped the overlay off before receiving the one from them.
 
This is not available - yet. I'll be working on it eventually.

Also, do NOT buy the CC cpo from MameMarquees. It's got a lot of issues. My fault for buying it, and not checking to make sure it was accurate. It's made from a bad file that's on the artwork sites. Eventually I'll be redoing that, too...


Yes I also unfortunately I bought the CC cpo from Mame-marquees, other stuff I've boughten from them had been of good quality. But this just looks like blurry shit. (bad scan).

However when I bought my CC cab the CPO panel was pretty much destroyed (peeling etc..), but I've held off putting on the MameMarquee's CC version because it looks so low quality. Let me know, Mod when you do your updated version, much rather have an accurate version then a blurry mess. $35 bucks down the shitter on that deal.



;
 
Yes I also unfortunately I bought the CC cpo from Mame-marquees, other stuff I've boughten from them had been of good quality. But this just looks like blurry shit. (bad scan).

However when I bought my CC cab the CPO panel was pretty much destroyed (peeling etc..), but I've held off putting on the MameMarquee's CC version because it looks so low quality. Let me know, Mod when you do your updated version, much rather have an accurate version then a blurry mess. $35 bucks down the shitter on that deal.



;

Will do. I'm taking a bad Gyruss cab and converting it to CC at some point (already have a nice Gyruss), so I'll need someone with a dedicated CC to take some pics and measurements for me of the speaker/monitor area someday, too....
 
Will do. I'm taking a bad Gyruss cab and converting it to CC at some point (already have a nice Gyruss), so I'll need someone with a dedicated CC to take some pics and measurements for me of the speaker/monitor area someday, too....


Cool, no prob. Just let me know what measurements/pictures you exactly need and when. :)

;
 
dont buy the pac multigame monitor bezel either... bought it thinkin the maze design would wrap around the bezel and it doesnt its justa cut an pasted cpo design over and over again
 
I'm also waiting on the CC side art.. Hey Daryl I do have a spare cc pcb... maybe a trade ? ship me one of your paper boy cabs or burgertime, or dk and you got a deal ;-)
 
Will do. I'm taking a bad Gyruss cab and converting it to CC at some point (already have a nice Gyruss), so I'll need someone with a dedicated CC to take some pics and measurements for me of the speaker/monitor area someday, too....


I've got a circus charlie so let me know..I can help you out on measurements too...mine got that mame shitty cpo too...this artwork definitely needs reproduced...cpo and sideart...I think the sideart would be a great candidate for Rich's solvent inkjet work with a clear silkscreened over top...I'm thinking the original art was made cheaply anyway and Rich's quality is better than the original stuff...I have journey artwork to prove it..

Someone needs to get that artwork prepped and get it to Rich...in the future..Mine is pretty faded so color matching would prove to be difficult
 
I've got a circus charlie so let me know..I can help you out on measurements too...mine got that mame shitty cpo too...this artwork definitely needs reproduced...cpo and sideart...I think the sideart would be a great candidate for Rich's solvent inkjet work with a clear silkscreened over top...I'm thinking the original art was made cheaply anyway and Rich's quality is better than the original stuff...I have journey artwork to prove it..

Someone needs to get that artwork prepped and get it to Rich...in the future..Mine is pretty faded so color matching would prove to be difficult

I have a pretty good file to work from for the side art:

CC1.jpg


I just need to brush up on my Illustrator techniques so i can make sure that the color gradients work out properly in areas like this:

CC2.jpg
 
Nice..you need to get to work or there are some others on this site pretty good at working with those programs..Like I said I know Rich could turn out some sweet sideart and then I could do a total repaint and restore on my working unit ...the cpo could be done too..but that would have to silkscreened..if you want to match the quality..I'm sure we could get enough interest to a small run of those..I did 10 professor pac overlays silkscreened pretty cheap at a very affordable price.
 
hey steve didn't I send you that file ? I had another scan from my cab in addition to this one If I remember correctly this one was provided by another klover "pacmaniac"

almost a year ago I posted this:
http://forum.arcadecontrols.com/index.php?topic=91088.0

Actually, I have your scans still, but they had a ripped-off section and were incomplete. This file I found after someone spotted it offsite and alerted me to it....
 
Back
Top Bottom