Circuit board ID

RJ

Member

Donor 2012
Joined
Sep 5, 2002
Messages
653
Reaction score
18
Location
Illinois
These were in a box with several other game boards. Not sure what game uses a computer mother board with an edge connector.(see pic)

Board Label
Socket 370
Intel P3
Ce E139761

I got the specs. on the mother board. The bags are sealed they look brand new.

There are no labels on the anti static bags.

Any interest?

thanks

RJ
 

Attachments

  • photo.jpg
    photo.jpg
    100 KB · Views: 41
  • photo 2.jpg
    photo 2.jpg
    43.5 KB · Views: 25
I had an old IBM motherboard with the edge connector, it's for a riser bracket, for all of the isa and pci slots

It was a pentium 2 450mhz ibm

Not much good without the riser unfortunately :(
 
board

thanks
I think it goes in a game or a Slot machine or maybe a touch screen game now that I think about, have to do some research.

RJ
 
Probably is from a megatouch or something small like that. I have seen small form factor MB's like that in PC's that were really compact. Like they said, a riser card goes on there and your add on cards sit horizontal instead of the typical vertical arrangement. As it is I would value it around a nickel. I doubt its slot machine, they use proprietary hardware in all cases as far as I have seen.
 
I can't think of the right acronym, but that is/was a small desktop socket 370 motherboard. It went into smaller/flat cases where the PCI riser was on the far side. Typical for small desktops, point of sale systems, etc. That long edge connector went into the riser board.
 
boards

Thanks for the info guys.

I guess I will use the boards for parts. I have a couple of CD 100's that I am working on, that need the batteries changed on.
The 3 volt battery holders on boards will be usefull.

RJ
 
Back
Top Bottom