Cinematronics Speakers sourcing

Zinfer

Well-known member
Joined
Apr 19, 2008
Messages
4,497
Reaction score
32
Location
Lima, Ohio
Were the Cinematronics 4 Ohms or 8? Having a hard time finding a replacement.
I've been told that the adequate replacement was an 8" 8 Ohms, 10Watts. But go out and try to find a speaker like that.
I thought maybe I found one here but..just not sure as the original had no specific markings.
The original speaker however looks very like that 4 Ohm speaker. While searching I came across countless 'Woofer's'.
 
Last edited:
Thanks Joey, I went ahead with the second link, the 8 Ohm. I'll see how it works out.
 
Thanks Joey, I went ahead with the second link, the 8 Ohm. I'll see how it works out.

Good choice since they are 8 ohms. If you hook up a 4 ohm speaker, expect your sound board to go within a short period of time.
 
Ack - that would have been bad. I just had the sound board looked over by Bill Boucher along with the CCPU board repair.
 
Back
Top Bottom