Chicago Coin Foreign Legion Schematics

HighTower

New member
Joined
Nov 8, 2023
Messages
6
Reaction score
0
Location
Western Australia
Hey guys,
I have a CC Foreign Legion here Im trying to get running but don't have any schematics.
Does anyone have a scanned set of these I could use for reference by chance?
Cheers.
 
Is it complete. Does it look like anything is missing. A lack of schematics is common with these things. Did you give it a good cleaning and adjust the leaf switches properly?
 
I found my Chicago Coin Sharpshooter schematics in the back lower door area. Have you managed to get in there yet? They were in a yellow envelope.
 
Is it complete. Does it look like anything is missing. A lack of schematics is common with these things. Did you give it a good cleaning and adjust the leaf switches properly?
It is complete...starts a game 50% of the time, reels all reset. The game doesn't stop on the timer and the planes once started keep going and going and going. The pop-up target don't seem to be working. I'm start to work my way through it as we speak :)
 
I found my Chicago Coin Sharpshooter schematics in the back lower door area. Have you managed to get in there yet? They were in a yellow envelope.
Yeah I've had a good look through the entire cabinet and no schematics unfortunately. This came from a local carnival when they were closing up after 40 something years, but I don't think it had been running for a while.
 
I imagine Pinball Resource has whatever documentation there is for it... getting Steve Young to mail it to Australia could be a challenge though.

I'd want an original or a decent reprint on paper, personally. Trying to work on EM stuff from a scan on a laptop is often a recipe for frustration.

I wonder if Mr. Pinball Australia might have this kicking around...
 
Okay so Ive cleaned up and adjusted all the switches etc. Most of the game appears to work now with the exception of the planes - they dont stop. Even when the game is over the plane motor is still moving the planes around.

Also could anyone point me in the right direction of how to source spare parts for the gun stylus (is that what they're called?)...the parts that contact the rarget board
 
Back
Top Bottom