Checking Interest: 4-Player Eliminator CPO's

atariscott

Well-known member
Joined
Apr 18, 2005
Messages
1,361
Reaction score
34
Location
Roseville, California
This project is in the color matching stage. A set of 4 overlays, silk screened and die cut will run about ~$200. Just gauging interest at this point. A pre-order will start sometime in the future.

Looking to possibly repro the cabinet too.

I may also offer the upright Eliminator overlays as it is similar.

4playelim.jpg

elimcpos.jpg


People who are interested-

Dale Luck -1 Set
Steven Hertz - Set of CPO's / 1 cabinet.
Mike Snider 1 Set
Me 2-Sets
Zonn -1 Set
oppolo - Set of CPO's /maybe 1 cabinet.
PeRFiDiouS- 1 Set CPO's
SeaWolf - 1 Set CPO's
mrbill08 1 Set CPO's
CallanH -1 Set CPO's
mjenison -1 Set CPO's
Mark H -1 Set CPO's
p1001 -1 Set CPO's
 
Last edited:
I will buy a set.

Jenison might want a set also. I would email him since he may not see this thread.
 
I'm in for a set.

Sit down ct is interesting. Either one I will need a cab and control panels.

Looks like a color matched monitor bezel or overlays for a cardboard bezel would also be a necessity as well.

Bill
 
How about a canopy/marquee repro?

Almost all the 4player machines are missing this part.
 
I will buy a set.

Jenison might want a set also. I would email him since he may not see this thread.

Yeah, right :)

I'll take a set as well!

How about a canopy/marquee repro?

Almost all the 4player machines are missing this part.

Someone did find an original; it would be a matter of them cooperating with someone who could reproduce them. I already have the "4-player" marquee artwork vectorized (not like it's very complex or anything) which I could contribute. Though, I've never had anyone ask me for this artwork, which means probably no one has ever even attempted to build the wooden version of the canopy I have posted on my website :(

I'm in for a set.

Sit down ct is interesting. Either one I will need a cab and control panels.

Looks like a color matched monitor bezel or overlays for a cardboard bezel would also be a necessity as well.

Bill

I talked with Scott about this; hopefully he will either get these reproduced himself, or hopefully share the color information with someone interested in reproducing the cardboard bezel so at least they match.

Interested in 4 Player Cocktail CPOs if Cabinet Plans will be made available (location is Munich/Germany :) )

It's safe to say the plans and custom parts needed will be available by mid September.
 
Sorry for not keeping up on this thread. I will update it when I can sit in front of the computer for more than 30 seconds at a stretch. I have been flat on my back since Tuesday.....moving games sucks.
 
I haven't thought about Sega vector stuff for a very long time - did anyone ever figure out how to drive a WG6100 with signals meant for a G08? Or are the reliability fixes for the G08 sufficiently solid that such a machine could safely be run (possibly unattended) for 8 hours a day for a few years?

If the cabinet can be reproduced (either in the form of wood, or in the form of bits suitable for a ShopBot CNC machine), count me in.
 
I'm in for a set.

Sit down ct is interesting. Either one I will need a cab and control panels.

Looks like a color matched monitor bezel or overlays for a cardboard bezel would also be a necessity as well.

Bill

I know a guy that can do the metal work.......
 
Back
Top Bottom