natey_boy BEWARE. Known scammer. Will take your money and se Joined Sep 26, 2008 Messages 1,061 Reaction score 4 Location Anchorage, Alaska Jul 25, 2011 #1 anyone have any idea what chassis goes to this monitor? Thanks a ton!
Robran68 Well-known member Donor 2011 Joined Feb 17, 2008 Messages 3,619 Reaction score 36 Location Fraser, Michigan Jul 25, 2011 #2 Tubes are generic, you have 8 and 10 pin flavors. It's the yoke that would verify what chassis it had "IF" it was an arcade monitor. Check Chad's yoke reference sheet and see if your yoke ID matches any of the yokes listed. http://www.arcadecup.com/yoke_crt.html Last edited: Jul 25, 2011
Tubes are generic, you have 8 and 10 pin flavors. It's the yoke that would verify what chassis it had "IF" it was an arcade monitor. Check Chad's yoke reference sheet and see if your yoke ID matches any of the yokes listed. http://www.arcadecup.com/yoke_crt.html
kilgers New member VAPS Joined Dec 26, 2010 Messages 159 Reaction score 3 Location Corvallis, Oregon Jul 26, 2011 #3 . 25" Polo most likely. It might work with several different chassis, though. Check the resistance on the yoke windings and compare with other chassis. http://www.junknet.net/donor-tvs
. 25" Polo most likely. It might work with several different chassis, though. Check the resistance on the yoke windings and compare with other chassis. http://www.junknet.net/donor-tvs