chassis that blows the Main power fuse in my test rig

PrairieDillo

Well-known member

Donor 2011, 2024
Joined
Aug 3, 2009
Messages
5,152
Reaction score
534
chassis that blows the Main power fuse in my test rig

My main power fuse is blowing with I plug either of 2 K7000 25" chassis in. The fuse on the monitor chassis still stays.

This is one crazy short somewhere and it happense with two chassis that don't seem to have been capped or worked on. Any ideas on what may have gone wrong? diodes in the power section?
 
Thanks ken, I should have gone looking for shorts immediately. It turned out to be a Diode D20 that was shorted... this was a dirrect short to the AC coming in... I was suprised that it was blowing the main fuse vs the monitor fuse... that's what confused me. This was actually two chassis that had the same symptom and problem. Weird....
 
Back
Top Bottom