Chassis ID

RalphT3

Well-known member
Joined
Feb 13, 2009
Messages
1,164
Reaction score
82
Location
Cahokia Heights, Illinois
Friend has a cocktail Arkanoid game and has this monitor that is waving at me. I am talking him out of LCDing it and just repair it. I just cant ID it. The framing has a 19 inch G07 label and it clearly is not. No make on the chassis itself. Mostly all chinese characters around the perimeter except for the couple potentiometer functions. But it has a Sharp Image feature of the remote adjustment board with a degauss switch. Couple other key features is an easily accessible width coil with adjustment "tool' attached, the 3 adjustment pots on the left above the video input plug in the "Left" pic, the 2 ceramic resisters mounted 90 degrees from each other in the "right" pic with VR101 next to them.
The pic looks good, just need cap and flyback.
 

Attachments

  • Whole.jpg
    Whole.jpg
    174.3 KB · Views: 21
  • Left.jpg
    Left.jpg
    143 KB · Views: 20
  • Right.jpg
    Right.jpg
    128.1 KB · Views: 19
you have a POS universal chassis replacing a G07.

i recommend trashing that chassis and getting a G07.

if you go that route and need a G07, i have them.

if you want to cap the chassis, i can build you a kit.
shoot me a list of the caps on your chassis.

Peace
Buffett
 
Back
Top Bottom