NEW Centipede trackball that works with 60-in-1 board

bones3010

Member
Joined
Mar 22, 2008
Messages
574
Reaction score
3
Location
Connecticut
Hello everyone...

I have an old Centipede cabinet I'm trying to get functional again with a 60-in-1 board since I need to wire it up from scratch anyway. I have it all wired and running except for the original ATARI trackball which is apparently not compatible with the 60-in-1 boards.

Can anyone suggest and link me to a site that sells compatible trackballs for these newer multigame boards that will fit in the centipede control panel? I think the centipede trackballs are 2-1/4 inch.

Thanks in advance!
 
Hello everyone...

I have an old Centipede cabinet I'm trying to get functional again with a 60-in-1 board since I need to wire it up from scratch anyway. I have it all wired and running except for the original ATARI trackball which is apparently not compatible with the 60-in-1 boards.

Can anyone suggest and link me to a site that sells compatible trackballs for these newer multigame boards that will fit in the centipede control panel? I think the centipede trackballs are 2-1/4 inch.

Thanks in advance!

www.ArcadeShop.com or www.TwistedQuarter.com . Basically they only make one type of 2 1/4" trackball anymore, the Happ version. It works fine with the 60 in 1.

If your trackball works fine, you could also just swap the optic boards on the trackball with new happ ones.
 
Thanks for the replies! I'm a bit bummed I need to get a new trackball, but it is what it is... Just glad those HAPP ones are readily available.
 
Back
Top Bottom