Centipede trackball not working after rebuild

dan10things

Member
Joined
Jan 3, 2007
Messages
289
Reaction score
18
Location
Seattle, Washington
I had a perfectly good working, but worn and dirty Centipede control panel. I stripped it down, replaced the rollers, buttons, white ball, put on a new overlay and hooked it all back up and now the track ball won't register at all. Original track ball and wiring, I only replaced the rollers and plastic ball. The buttons all work, I can start a game and fire, but no trackball movement.

So far I've:
-Unconnected and reconnected all the connectors
-Checked my photos to see I hooked it all up the same
-Tried swapping the optical board connectors to see if anything changed

Any suggestions on what I should be looking for next? I need help... thanks!
 
Back
Top Bottom