centipede sprite wont move

paul400

Well-known member
Joined
Nov 8, 2010
Messages
2,416
Reaction score
219
Location
Hixson, Tennessee
the archer is stuck and wont move at all in my centipede mini, did all the usual checks, then i swapped boards with my full size. board from my full size worked fine in my mini, but the board from the mini in the full size would only move to the left and stay there. circuit board failure is where i am leaning, anyone kow what circuity to look at?
 
4584's on the input, or possibly a bad mux, flip flop, or counter. Look at the Mini-Trakball circuit.
 
Back
Top Bottom