Centipede sideart positioning?

mjenison

Well-known member
Joined
Aug 1, 2002
Messages
1,573
Reaction score
420
Location
Streamwood, Illinois
Hi all,

I forgot to take positioning dimensions before I pulled off my Centipede upright sideart to be replaced with Phoenix Arcade reproduction art, which I have yet to unroll. Can someone provide me with positioning dimensions? I couldn't find any online. I'm sure it differs slightly from cabinet to cabinet, so a few sample sets would be nice. Thanks!
 
Follow up:

My cabinet originally had pink outlined Centipede, and the artwork from Phoenix Arcade is also pink outlined. I got the offset dimensions from a person who had original sideart on their Centipede to use for my offset dimensions.

Turns out the repo sideart artwork was just a tad shorter than the original by about 1 5/8 inches. Positioning left to right there isn't much of an adjustment to be made (the artwork only hung over the sides by about 3/16 inch on each), but whereas the original artwork is about 1 1/8 from the bottom, I'd recommend positioning the repo artwork a little higher to adjust for its height difference.
 
Back
Top Bottom