Museum of the Game® & International Arcade Museum® Forums

Hello, I am new to the Arcade world. I found a couple Centipede Cabinets in Poor-to-OK condition. One Cabinet has a Power Supply AR-Board and all wiring harnesses. I figured I would start by checking the Voltages on the PS then the AR. The numbers for the DC voltage on PINs 1-3 are a bit off. Should I be concerned?

  • Power Supply Testing
    • Pins 1, 2 and 3
      • All mine measure 14.7 VDC - Seems HIGH
      • I do no need to hold back panel switches in
      • Will get readings if not powered on and capacitor is charged
    • Pins 6+ - VAC
      • Make sure to hold both panel switches (front and back of cabinet)
      • Make sure Power Switch is ON (Flipped on is to the right)
    • Pins 6 / 7 - 37.8 vac
    • Pins 7 / 9 - 8.6 vac
    • Pins 10 / 11 - 32 vac
    • Pins 10 / 12 - 64 vac
    • Pins 13 / 14 - 32 vac
    • Pins 13 / 16 - 64 vac
Back
Top Bottom