FS Game: Centipede project in MI

SuperGunGuru

in Memoriam

Donor 2014
Joined
Aug 20, 2005
Messages
5,102
Reaction score
311
Location
Bath, Michigan
Rating - 100%
26   0   0
Hi, all

I have a working, but cosmetically very rough Centipede cab for sale in Michigan (located right between Flint and Lansing).

The good:
- Game works
- G07 rebuilt with a new flyback and caps (heavy Centipede burn)
- Rebuilt trackball with new ball, bearings, and rollers. I *think* I even replaced the housing at one point
- Marquee is in very nice shape

The bad:
- The cabinet is in very rough shape overall and was definitely exposed to moisture and home to a rodent in the marqee arera. I tried to get rid of the nasty smell but gave up and put kilz in the marquee area which helped tramendously. The edges are swelled/bubbling and there is also a chunk missing by the control panel. The lower back panel is missing and the back door would be easier to just cut a new one too. I don't have the heart to part this thing out since I think it can be saved with enough work, but I don't have the desire to do it. Here are a few pics.

DSCN0819.jpg


DSCN0821.jpg


DSCN0822.jpg


DSCN0820.jpg


I figure with the parts in it, I'd let it go for $200 or trade for parts plus or minus cash if needed

Parts and artwork I need:

Domino Man PCB
Domino Man front panel with all the plastic dominoes on it
Q*Bert side art
Galaga CPO, kickplate or side art
 
i think that might be a part out bill...too much for me
Yeah it's definitely in rough shape and I'd be lying if I said the thought hadn't crossed my mind a few times. I gotta give her a chance to see if someone wants to take it on though. :)
 
If you do end up parting it out let me know - I've got a nice cab and monitor, just need everything else. Would be a big help not to have to track down all the parts.
 
Hi, all

I have a working, but cosmetically very rough Centipede cab for sale in Michigan (located right between Flint and Lansing).

The good:
- Game works
- G07 rebuilt with a new flyback and caps (heavy Centipede burn)
- Rebuilt trackball with new ball, bearings, and rollers. I *think* I even replaced the housing at one point
- Marquee is in very nice shape

The bad:
- The cabinet is in very rough shape overall and was definitely exposed to moisture and home to a rodent in the marqee arera. I tried to get rid of the nasty smell but gave up and put kilz in the marquee area which helped tramendously. The edges are swelled/bubbling and there is also a chunk missing by the control panel. The lower back panel is missing and the back door would be easier to just cut a new one too. I don't have the heart to part this thing out since I think it can be saved with enough work, but I don't have the desire to do it. Here are a few pics.

DSCN0819.jpg


DSCN0821.jpg


DSCN0822.jpg


DSCN0820.jpg


I figure with the parts in it, I'd let it go for $200 or trade for parts plus or minus cash if needed

Parts and artwork I need:

Domino Man PCB
Domino Man front panel with all the plastic dominoes on it
Q*Bert side art
Galaga CPO, kickplate or side art

I'll take it Bill. I need one for my Dad to be able to play when he comes over.

-Tim
 
Back
Top Bottom