Centipede Multi

djw90

Well-known member

Donor 2011
Joined
May 14, 2008
Messages
13,112
Reaction score
112
Location
spokane, Washington
Has anyone put the Millipede/Centipede kit in a Centipede cocktail???
I just got a Centipede CT, but have not got it home yet. I have a Millipede board and the kit. I will need to order the adapter from arcade shop.

What im wondering is there enough room for the adapter in the CT cab?
Im thinking there should be but thought I would ask before I order it, since I cant look at it yet.

I want to put it in this baby:D

Centipedenew.jpg
 
The adapter adds about 3" or 4" on the connector end. So, you'll need that much extra space.
 
cocktail boards in these machines use a right angle adapter off of the board to the harness. you may need an extra rt angle adapter to make it all fit, Just a thought.
 
cocktail boards in these machines use a right angle adapter off of the board to the harness. you may need an extra rt angle adapter to make it all fit, Just a thought.
Bingo! When I ordered mine from Arcadeshop, they asked if it was for an upright/cabaret or cocktail. They have separate adapters for both applications.
 
That is cool that they have those right angle adapters for the cocktail. I never knew that and bought a Millipede cocktail so I didn't have to deal with the adapter.

P5150371.jpg
 
Has anyone just removed the edge connector pins and put them back in the Millipede configuration?
 
Bingo! When I ordered mine from Arcadeshop, they asked if it was for an upright/cabaret or cocktail. They have separate adapters for both applications.

SWEEEEEEEEEEEET!!!!!!!!!!!:)

That is cool that they have those right angle adapters for the cocktail. I never knew that and bought a Millipede cocktail so I didn't have to deal with the adapter.

P5150371.jpg


Thats a nice Millipede!!!!:cool:
 
Last edited:
Back
Top Bottom