Centipede issues

frytex

Member
Joined
Mar 25, 2008
Messages
534
Reaction score
1
Location
La Vernia, Texas
I am working on my Centipede, I have rebuilt the monitor and tested it in my Frogger game works Fine, when I plug it in to my Centipede this is what I get. I have chacked my ARII board in another game and it works fine, I have checked my +5 and -5 great my + 22 is reading +25 and my -22 is reading -22. I have a red light on my board and the player 1 and 2 lights are lit up but not blinking, I can not coin up. Any help will be helpful. the Green line and the red line rolls rolls.
 

Attachments

  • Centipede monitor.jpg
    Centipede monitor.jpg
    79.2 KB · Views: 40
He brought this up today and we tested it in a working game, and he definitely has a board issue (most likely with a ROM or RAM) but not because of this pic. His original harness was hacked up and this picture he has here is due to bad wiring and power. He needs to get that fixed before anything else.

With proper power, he has an attract screen (in spanish) but has thick colored bars running left and right (bars about an inch wide with about a 1/4" of black between them). The bars start out green, then switch to blue afte the 1st attract cycle, and alternate as the normal attract colors change.

I gave him 4 Centipede boards (at leas one working 100%) and populated edge connectors that I had from a Centipede that got converted to a Multi at work. He should be able to get a working Centipede out of it....
 
Back
Top Bottom