centipede - high or low volcano buttons?

Malice95

Well-known member

Donor 2011
Joined
Aug 29, 2010
Messages
3,692
Reaction score
31
Location
Howell, New Jersey
My centipede has high black volcano buttons for the player 1 and 2 buttons.
The button is barely pressable. Is this normal? Or should I be using the smaller
volcano covers?
 
Mine barely stick out the top of the cone, but are easily pressed. I have high-cones, as they all were originally. If your are difficult to press, they need to be adjusted from the underside of the CP.
 
My two-player button didn't stick out enough to press easily, but then I noticed the cone was sitting a little high. Screwed it back down into place, and it's like the other now.

And yes, they barely stick above the cone. That's normal. But they should still travel enough to register when you press them.

-Jim
 
Back
Top Bottom