FS Parts: CENTIPEDE cabaret side art preorder

darinjacobs

Well-known member
Joined
Jan 28, 2009
Messages
3,474
Reaction score
1,162
Location
Crown Point, Indiana
Rating - 100%
48   0   0
Screen printed from Atari's films thanks to Scott Evans.

I am offering this both ways; a precut version mirror imaged and a full sized sheet mirror imaged. Preorder price is the same either way, $150 plus $15 shipping in the 48 states. Other areas by quote.

Looking for 20 fully prepaid orders to get this into production and it will be in your hands 4-5 weeks afterwards. Project will be cancelled and all monies refunded if we don't hit 20. If production does start the preorder price is over and will raise up for those that didn't prepay.

Paypal is [email protected] and make sure you put which version you want.

Get in now if you want your art done a specific way (precut or full sized) because this is a small run and once these are sold they wont be reprinted.

================================================================================================================
Edit: if there aren't a lot of full sized orders I will not make them and only offer the precut version and refund $15 of your payment instantly
================================================================================================================
 
Last edited:
thats what i remember the price being too? how many people are on the list so far,are you close? i may need a set.
 
The cost was higher than I estimated back then because people asked for a full sized version. The sheet size to run both versions is 65x36. The precut only sheet size would be 48x20.

If the $15 is too much and you guys only want the precut sets and not the full coverage sets I can get it back down to $135 and that's still mirrored. I'm only making 50 sets. I can't make 100 sets and take a huge loss like I have on the other cabaret side art sets. I wont survive and no new products. I can't even remember the last time I sold a cabaret side art set.

If someone knows a high quality, cheap and reliable screen printer please shoot me their info. Fwiw, I have recently checked out 3 different screen printers recommended by fellow KLOV'ers and they were all higher priced. One guy even asked me to see the quote I got from my main printer because he didn't believe it.

So far not a single preorder.

I have Battlezone cabaret films and that would be right after this. If there is no traction with this preorder I will move onto that one with a price of $120 and a sheet size of 37x22 with no mirroring.
 
Last edited:
Going to watch the thread for a bit and see if you get some interest going. If it looks good I'll jump on board. It may take a few weeks to build though, I'd imagine.

My Centipede cabaret sides are very good, I just don't care for faux wood grain.
 
IMO, I like the original sideart size and price. Personally I think if you want all white sides you can just paint or vinyl the sides and then apply the artwork.

I was going to buy a set at $135 just to have for when I find a Centipede cabaret. :)

I'm probably in the minority(at least here on KLOV) but I like the wood grain Atari used. And I love looking at our Tempest cabaret with side art. :D

I completely agree with you.
The full coverage artwork amounts to fantasy art in my eyes. The game was never released or meant to look like that so I have no interest in it as such.
Others are still entitled to their preferences of the other type but I think they could easily paint the machine or cover it in white vinyl to achieve the same effect.

So can the people who want mirrored die cut pre-pay the $135+$15 now?
I am not clear if that is being offered or if it is only the $150+$15 at this time.
 
The cost was higher than I estimated back then because people asked for a full sized version. The sheet size to run both versions is 65x36. The precut only sheet size would be 48x20.

If the $15 is too much and you guys only want the precut sets and not the full coverage sets I can get it back down to $135 and that's still mirrored. I'm only making 50 sets. I can't make 100 sets and take a huge loss like I have on the other cabaret side art sets. I wont survive and no new products. I can't even remember the last time I sold a cabaret side art set.

If someone knows a high quality, cheap and reliable screen printer please shoot me their info. Fwiw, I have recently checked out 3 different screen printers recommended by fellow KLOV'ers and they were all higher priced. One guy even asked me to see the quote I got from my main printer because he didn't believe it.

So far not a single preorder.

I have Battlezone cabaret films and that would be right after this. If there is no traction with this preorder I will move onto that one with a price of $120 and a sheet size of 37x22 with no mirroring.

I'm all over the battlezone cabaret art pre-order. Let me know! Been waiting forever for this!
 
Full size sheet wouldn't be a deal breaker for me. I'd prefer not to paint of course, since it'd be easy to "restore" to wood grain otherwise, if another owner down the road so chose. $15 premium for a full sheet seems quite reasonable.

Would the printer be able/willing to run a certain number on larger sheets and the rest on the smaller, if it came down to that?
 
No full size for me. I want original other than the mirror. seems like everyone paying extra for the few who want full size doesn't seem right.

Paint or vinyl it and then apply.

So are we firm, on this only being offered full size or are we still discussing the normal size die cut?
 
PS Higher or lower cost I'm in its only $15 bucks more! as long as I cant still get it die cut its all good.

So let me be the first -- preorder money sent!
 
Last edited:
No full size for me. I want original other than the mirror. seems like everyone paying extra for the few who want full size doesn't seem right.

Paint or vinyl it and then apply.

So are we firm, on this only being offered full size or are we still discussing the normal size die cut?

Sorry if I wasn't clear.

I am offering it both ways for the same price. You just need to tell me which way you want it;full coverage or precut. I'm trying to please everyone which is never an easy task.

If there aren't many people wanting the full sized art then I will drop that option and only make the precut version and refund $15

Hope this helps.
 
what if we pay for a full coverage set and there is not enough interest so you only do the original version?
Do we get a full refund?

I hadn't planned on painting the sides...I'm so lazy. LOL
 
If there aren't many people wanting the full sized art then I will drop that option and only make the precut version and refund $15

what if we pay for a full coverage set and there is not enough interest so you only do the original version?
Do we get a full refund?

I hadn't planned on painting the sides...I'm so lazy. LOL

Only 3 posts above yours...so yes, you are lazy mister! ;)
 
LOL

yes, but it says nothing about a complete refund for the people who pay for full size art.
I'm saying if I pay for full size art and it gets dropped with not enough people ordering it, I may not want the original size art with the $15 refund. I might just want a complete refund and forget the side art. Yeah, I'm lazy... :)

Only 3 posts above yours...so yes, you are lazy mister! ;)
 
Back
Top Bottom