centipede cabaret owners help

cnlmoore

Well-known member

Donor 2023
Joined
Jan 4, 2007
Messages
5,511
Reaction score
723
I'm trying to wrap up a restoration in a Brett built pede cabaret. Control panel is a repro and mounted to the cab it won't close properly. It slides into place just fine but won't clear the wood blocks any other way. I'm wondering if the blocks are a little over sized or if I'm missing something with the assembly. If someone with a cabaret could snap some pics and maybe measure the blocks under the panel I would be much obliged.

Chris

Here's the cab in question


http://forums.arcade-museum.com/showthread.php?t=182810
 
Anyway you can take a picture of the control panel you are using and how you have it mounted??

I used a Brett built pede cabaret as well and used the repro control panel with no problem. The control panels always fit tight on all the Atari cabarets(tempest, centipede, dig dug style) I have owned, but lets see what you got going on!!!

Brian

I'm trying to wrap up a restoration in a Brett built pede cabaret. Control panel is a repro and mounted to the cab it won't close properly. It slides into place just fine but won't clear the wood blocks any other way. I'm wondering if the blocks are a little over sized or if I'm missing something with the assembly. If someone with a cabaret could snap some pics and maybe measure the blocks under the panel I would be much obliged.

Chris

Here's the cab in question


http://forums.arcade-museum.com/showthread.php?t=182810
 
Back
Top Bottom