You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
I've got a board with one remaining problem I can't solve. Everything works fine except the archer immediately moves upward on player 1 only. Player 2 is OK (I don't have my bench wired for upright so it flips screen orientation like a cocktail and chooses the second set of trackball inputs). It also moves up in test mode.
Passes ram/rom and bus tests with fluke 9010a.
I pulled the last chips in the trackball circuits … L9 and D9. The issue remains.
I have looked the board over many times, cleaned it multiple times assuming a short between traces. I would expect a short to affect both P1 and P2 though.
I've pulled the pokey and EAROM out. It happens with the original CPU and with the fluke acting as the CPU. Caps and resistors around the circuit seem OK too. I've spent a ridiculous number of hours but won't stop until it's fixed.