Cd title page can't turn the last page or two

Fatality83

Member
Joined
Oct 10, 2011
Messages
854
Reaction score
24
Location
manchester, Pennsylvania
I notice that when I go to turn the album art pages on my Rowe Eagle laserstar that when it gets down to the last couple pages, it seems the motor has a hard time turning the pages and sometimes instead of the page flipping all the way like it should, the page ends up stopping about halfway. When you press it again, it completes the change and it goes all the way over. When I go to page back the other way, it sometimes flips two pages with one button press. I was wondering if there is something that needs adjusted or if the motor is wearing out? It only happens on the last two or three pages 80-99 or so. I also set the change speed to the max (9) hoping that would help but it doesn't. Any ideas?
 
You could have a broken title page or a page about to break. The little black tits on each page break off after awhile. It's what the pages pivot on.

Also, it's possible your title page assembly is falling apart. Look for loose/missing screws that hold the assembly together, especially around the gear rack and microswitches.

Remember, NEVER NEVER NEVER grab the pages with your hand and try to turn them. You will bust them for sure. Always use either the electric page turn switches on the keyboard or the page switches located on the service switch assembly. You can also use the "hand wheel" located on the motor to turn the pages.
 
Hi, Suzo/Happ are running down their stock of Rowe Ami parts worldwide, I got all the Sprag Wheels and Stem Bushing from their warehouses in the USA.

We may find that parts may be almost impossibe to obtain unless Victory Glass and Stamann's have parts made for home users.

Regards
Alan Hood
ami-man
UK
 
Back
Top Bottom