Hey guys, I'm restoring a converted Carnival back to its former glory. Someone modified the speaker panel and I wanted to confirm what thickness that panel is supposed to be? 5/8"?
Progress pics to follow…
Progress pics to follow…
Carnival Restore
- Thread starter Lamonsoff
- Start date
Brick Top
Well-known member
Should be the same as any other panel on the cabinet, it is finished on the edge with black T-molding as well.
OP
OP
OP
OP
Ready for paint. Marquee drops in fine with the metal spring strip pushing up the marquee.
Finished up the laminating as well.
Finished up the laminating as well.
OP
OP
A wee bit progress. Sideart from TOG. CPO and bezel from Szabos. New plexi.
Also did a tube swap as the original was dead. And I mean really dead, all the guns were fried. Still have yet to fire up the chassis though.
Also did a tube swap as the original was dead. And I mean really dead, all the guns were fried. Still have yet to fire up the chassis though.
OP
OP
Coin door done and installed. Next update will be a while from now as we will get started on the boards in November…hopefully.
OP
OP
Time to get down to business. Bad 3055 on the power supply thus far. 5v is now back…
Last edited:
muchuckwagon
Active member
Very clean, I like it! Good luck with the boards.
OP
OP
Got the board working. Wow are the sockets on this board shit. One bad ram.
Capped the sound board and amazingly it works too!
Can anyone tell me the brand of monitor/chassis this is? I have high voltage, but no neck glow.
Capped the sound board and amazingly it works too!
Can anyone tell me the brand of monitor/chassis this is? I have high voltage, but no neck glow.
Kagi 19 inch KB240162
www.arcadepartsandrepair.com
Monitor Chassis Pictures - Arcade Parts and Repair
Arcade monitor chassis pictures to help identify and aide in identification of your chassis that may need parts and help to visually ID components on PCB.
www.arcadepartsandrepair.com
Hey look, someone else asked the same question in the monitor sub-forum. 
Monitor ID, no neck glow
Can anyone tell me the brand of monitor/chassis this is? Came in my Carnival. I have high voltage, but no neck glow. Don’t want to troubleshoot this blind without schematics. I tube swapped it as all the guns were dead in the other tube.
forums.arcade-museum.com
OP
OP
Hey look, someone else asked the same question in the monitor sub-forum.
Monitor ID, no neck glow
Can anyone tell me the brand of monitor/chassis this is? Came in my Carnival. I have high voltage, but no neck glow. Don’t want to troubleshoot this blind without schematics. I tube swapped it as all the guns were dead in the other tube.forums.arcade-museum.com
That guy's an idiot….lol
OP
OP
And we're done! Pieced together a vertical K4900 setup from a bunch of parts. Found a second chassis that worked better with the donor yoke.
So happy to have this in the lineup!
So happy to have this in the lineup!
