Capcom-CPS schematics?

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
I'm trying to find the part value for a Ferrite Bead on the Capcom-CPS boards such as Magic Sword, Willow, Etc.

I have a couple different boards I'm trying to test that won't come up, and I noticed they all seem to have that part busted off (they were all thrown in a box). I verified via the pics on Crazykong that the bead is supposed to be there, so I need to replace it and see where that gets me.

I've checked the game manuals online, but haven't found schematics or parts listings yet. I need the value for FB1 on the 89624B-3 board. I tried to check FB2 and the others for values, but I don't see anything...
 
The only schems available for the CPS1 are for Forgotten Worlds - worth looking at (despite poor quality) as they may give you a few pointers.
 
FB? You talking about the Ferrite Beads with wires inside? If so, they are just simply wires. Zero Ohms.

Any 2 pin filter will work EXCEPT for the lone Ferrite Bead next to where the C board plugs into the B board. I wouldn't use a coil based filter there since that's the clock signal. ;)

RJ
 
Well, apparently it looks just like all the others on the board. I have a parts board sitting here for a SF2 that looks to have the exact same FB's on it, so I'm gonna pull one and toss it on tonight and see what happens.

If it's in the clock circuit, no wonder it won't come up...
 
Back
Top Bottom