Capcom Bowling won’t go into service mode.

mert8431

New member
Joined
Aug 7, 2011
Messages
50
Reaction score
1
Location
MCHENRY, Illinois
So I picked up a Centipede cocktail cabinet that was converted into an Capcom Bowling and I'm having an odd issue with it. I was able to get it into the operator menu, put it into free play, make other adjustments and all that good stuff; but due to the battery being dead it wouldn't retain those settings. Today I went to try to put it into service mode and the game just restarts itself or occasionally the game just freezes when the service button is hit. The monitor will also occasionally act like its losing sync when the service button is hit, then you hit again and it's back to where it should be.
I did notice some occasional graphical hiccups with the board as well as some sound issues. (Lots of static when the pins are hit and it's not the speaker.) I also tried plugging it into another JAMMA based cabinet and got the same results when hitting either the test or service buttons…
I upped a video to show exactly what's going on.

Link to vid: http://youtu.be/gPa4B4Mvs7Y

Thanks all! :)
 
Back
Top Bottom