Capcom 18 in 1 CPS2 Board - Setting it up?

robertk.wade

New member
Joined
Oct 12, 2010
Messages
1
Reaction score
0
Location
Kentucky
I have got the Capcom 18 IN 1 CPS2 board I am trying to set up and am having some issues - I have got the osd card put into the jamma connector on the board - to the osd I have the jamma with the correct voltage and pinouts (I know for certain as I have this cab wired up to a 60 in 1). When I turn on the machine I get no picture or sound - the green lights on the board light up as if everything is ok. I do not have anything wired up to the kick harness - does the kick harness need +5v and +12v for this board to work? Just trying to figure out what I am doing wrong.... Any help would be greatly appreciated.

Robert
 
Back
Top Bottom