cap value on wgk7401

Joshuart311

Member
Joined
Dec 6, 2010
Messages
212
Reaction score
2
Location
Shreveport, Louisiana
im working on a k7401 and noticed a cap missing on the neckboard at position c519.
anyone know the cap value or can look at their neckboard? im finished with my cap kit but need to know what cap to put there. i believe it is 4.7uf at 50v . i dont have one. is there any other cap i can substitute?
 
C519 is an optional cap and is not always there. What makes you think it's supposed to be?
 
Ok so I was missing composite sync from my test rig. Monitor looks great. Thanks modessit for the reply. Another monitor back from the dead.
 
I have a working K7400 with the legs still in the neckboard for C519, but no cap, and it works just fine.

Apparently it was in the design for some purpose, then it was decided to remove it from some models. Easier to cut it off than to desolder it...
 
Back
Top Bottom