Cap Map for Motorola XM501

ibis101

New member
Joined
Aug 18, 2009
Messages
7
Reaction score
0
Location
Winter haven, Florida
I have a XM501 monitor and I can find four of the caps that need replacing but the kit came with nine caps total. Since this kit is for both the 501 and 701 I am sure one or two are not used. But not 5! If anyone has used one of Bob Roberts XM501 cap kit before could you please help me out and maybe post the replacement locations (C-26, etc.) or provide a map? It would be greatly appreciated!!
 
Good call on the service manual download. Here's something to get you started once you have downloaded that.....

C1, C2, C4, C6, C16, C24, C36 are all on the mainboard.

C43 is the big can with 4 sections. (probably not included by Bob)

C47 is the other big can. (also not included)

C50 is on the small plugin card.

C51 is under the chassis. That's the one that's difficult to deal with.
 
I have a manual and found four of them but the others just didn't seem to match up. The same with looking under the chassis, nothing seemed to match. I appreciate the heads up and will definately look at these locations closer!!! And thanks for the information!!!

ibis
 
Back
Top Bottom