Cap Kit Info

Fudd

Active member
Joined
Jun 5, 2006
Messages
2,382
Reaction score
13
Location
Kalamazoo, Michigan
Gonna pop my cherry on doing a cap kit for my 2 games here are the numbers i came up with off the boards

Pole Position - Goldstar A48kmx02xx

Galaga - WGR1972-hogss7L

What cap kits do i use...i am not sure what the above numbers relate to if anything...only thing obvious to me is one's a goldstar and ones a wells gardner..
 
attached are the pictures

the brown board is in my Pole Position...still not sure what it is..

the green board is from my galaga...looks like a wells gardner 7203

also what is the stuff on my WG board in the upper right hand corner underneath the caps? i saw this on the pic on bob roberts site as well..
 

Attachments

  • Picture 001.jpg
    Picture 001.jpg
    96.1 KB · Views: 23
  • Picture 002.jpg
    Picture 002.jpg
    90.3 KB · Views: 21
  • Picture 003.jpg
    Picture 003.jpg
    97.9 KB · Views: 20
  • Picture 004.jpg
    Picture 004.jpg
    93.2 KB · Views: 24
  • Picture 005.jpg
    Picture 005.jpg
    94.6 KB · Views: 25
first pics are a wg7200

seconds look like a kortek

what you see under the caps is likely silicone to stablize the caps from movement , pain in the ass at times but cleaned off easily
 
the green board is from my galaga...looks like a wells gardner 7203

Yes, that is correct.

the brown board is in my Pole Position...still not sure what it is..

This is a Kortek chassis. it looks almost - but not quite - exactly like a KTX-26, but it's obviously not to a 25" tube. Check the sides of the flyback cage for a KT number.

also what is the stuff on my WG board in the upper right hand corner underneath the caps?

Large caps sometimes have a tendency to vibrate when under load. This epoxy was put there to keep that from happening. Ignore it...
 
Back
Top Bottom