You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
So I started out with a chassis that worked but had some fold over and needed the horizontal width transistor. I did the cap kit and followed the list one by one and compared them to the original. There were a couple that were different but I assumed that they were replaced with what original owner had on hand and I swapped them with what the kit had from Arcade Parts and Repair. After that it seemed to work temporarily and then nothing. So I swapped out the fly back after checking all other parts on the wells repair page. It seems I have no heater voltage and I get an image although very dill only when my TPG is set to standard resolution, Of course the image is wrong. I read somewhere that the APAR kits have some hitch with C732 being BP in the kit and belongs somewhere else and C734 being different but the schematic shows them correct? I am confused, I follow the instructions but they are wrong? Can som done please help. Something happened that shouldn't have and now my chassis is more broken than before.