Can't find this Taxi part

Cachorrito

New member
Joined
Jan 28, 2008
Messages
425
Reaction score
0
Location
Alexandria, Virginia
I've got a problem with my Taxi spinout plastic. The edges have cracked and so the bolts holding it down to the playfield are loose. This is the big red plastic chute on the right side of the playfield. Anyone know where I can get a replacement, or have one parted out that can provide this? Thanks.
 
I've got a problem with my Taxi spinout plastic. The edges have cracked and so the bolts holding it down to the playfield are loose. This is the big red plastic chute on the right side of the playfield. Anyone know where I can get a replacement, or have one parted out that can provide this? Thanks.

I think what you are needing is the "Spinout ramp" and I don't think there are any reproductions for those. Not sure if anyone is planning on making them, but you could try to e-mail Pinball Inc. to see if it is on their radar for production.

http://www.pinballinc.com/

Chris
 
I have the same problem on the top left hole. I was thinking of maybe using some washers to help the problem out. Mine is not overly bad though. I would buy a new one for sure if someone made them. That is as long as they only cost about the same as the departure ramp.
 
I just picked up an NOS one for 110.00..... :)
BTW,there is a guy down East who knows where to get some NOS ones but they want 300.00 for them.
 
Back
Top Bottom