Can't Decide - Pick Only 1 Cab Please...

Is the bottom of #3 solid? It looks like it might be soft. If so, I'd say #1 looks like the strongest cab. If #3 is solid... it looks like it might clean up the best even though it looks a little faded. Either way I'd say #2 is your weakest choice. Even if you decide to keep #1 you could still swap out the better pieces from the other 2 cabs before moving them on. Like the steering bezel on #3 looks much better than the rest. Good luck.
Steve
 
Thanks for your time... I agree that #1 and #3 look the best, #2 is going to be stripped out tonight and the cab placed in storage.

I took some time this morning and named all the pictures for the outside of the cabs. I then put all the extra shots and what not into their own folder. This should make it a little faster if anyone else wants to look for me at the outside of the cabs.

I am going to lay the 2 remaining machines on their back side so I can get pictures of the very bottom. I will post up when I have those pictures up.

#1 and #3 do have their issues, like #1 has a broken cab corner, #3 has a 2 bad spots 1 up top on the side and 1 on the side by the steering wheel.

Anyway thanks for your time... You made it clear that #2 should be the first to go.
 
Sorry, I didn't look at all the pictures, but based on what I saw I agree that 2 is the loser and it's a toss up between 1 and 3.
 
PP2 is now stripped out and in my storage unit. So now its time to decide between pp1 and pp3. I added some more shots of the bottom of the cabs.

http://mrsalvage.com/pp/pp1/

http://mrsalvage.com/pp/pp3/

So which one should I go for? I also notice that the left rear bottom on both machines has the same issue. Half the board has folded in. And one more thing how the heck do you change speaker grills? All three seem to be riveted in.

Either way they both look like a lot of work...
 
Back
Top Bottom