Can't Adjust Vertical Pos

copyimitation

New member
Joined
Jun 12, 2015
Messages
102
Reaction score
1
Location
Ohio
My control knob for vertical position is broken on my remote board and it seems to be the only knob on my machine that adjusts this.. My game doesn't look TERRIBLE, but it is up about an inch too high. This board seems to be super rare, so does anyone know a way to fix this?
 

Attachments

  • 18159606_1216639455122303_1679857781_o.jpg
    18159606_1216639455122303_1679857781_o.jpg
    207.6 KB · Views: 38
that style pot never had a knob
use a plastic and or small metal straight screw driver
and turn the center slot

ed
 
Last edited:
Nope, the slider is missing. ;)

desolder it and measure the resistance between the two pins on the lower side to get the value.
The pot is a standard Piher PT15.

Depending on the value you can be lucky and get a similar one on e**y. ;)

Edit: Think one of those will fit:

10k, 50k, or 100k are common values.

http://www.ebay.com/itm/4x-1K-2K-10...TRIMPOT-Top-Adjust-Trimmer-PT15-/171494457360


those pots in the picture are not Piher pots they are CTS pots but Piher makes one with the same pcb layout.

CTS only makes one pot with that type of pcb layout but Piher makes two different ones so if you use piher use the V18 and NOT the V24. i stock almost 100K trimmer pots and they can get quite involved with all the options/part numbers. if you have trouble i may have that in stock just let me know.
 
Last edited:
I have that same remote board in my Jaleco Lo Pro. If you need me to desolder the pot in question, or need pictures of it as installed, let me know.
 
My control knob for vertical position is broken on my remote board and it seems to be the only knob on my machine that adjusts this.. My game doesn't look TERRIBLE, but it is up about an inch too high. This board seems to be super rare, so does anyone know a way to fix this?


i checked and yes i do stock the exact 10K replacement pot if you need.
 
Back
Top Bottom