Can someone please help me out with an NFL Blitz

Shawn1976

Well-known member

Donor 10 years: 2016-2025
Joined
Apr 17, 2008
Messages
8,767
Reaction score
460
Location
Saint Augustine, Florida
I was wondering if I could call on the KLOV community to help me with some internal pictures of the wiring and PCB of their NFL Blitz.
I just acquired one myself and I'm looking to verify the wiring based off of the manual diagram and some internal photos of the game.
Any help would be greatly appreciated.
Thanks
 
If no one else comes up with any pictures I could get some in a day or two when I get home.

2 player or 4 player? Also any particular area's you need pictures of, as in the i40 board or just how it's all ran in the machine itself?
 
I actually need the pictures for a 4-player.
Was basically looking for the bottom where the power supply and power feeds are in the middle as well as the left side where the PCB/Hard drive are.
Was trying to match up where all of the wiring is hooked up to.
 
Ok well yours is slightly diff then mine, if your saying the PCB is on the left. Mine is mounted on a board near the back for easy access. Thou in the end it should all be the same, I'll get what pictures I can as I said in a day or two if no one else beats me to the chase.
 
Thank you.
I am referring to the left if you are looking from the back of the game too just to clerify.
Anyone else that can help me out?
 
I assume you are looking for seattle(blitz, 99, or 2000) not vegas setup (blitz 2000, showtime, sportstaion).

I have a vegas setup here at home. I have a kit blitz 2000(seattle) in storage.

there may be loose wires in your cab that are not used. Stuff for bill validator and n64 cart.

here is an old vegas pic. Essentailly the jamma connector, 2 I40 connectors and Power going to HDD. I Have seen power comming off the board to the HDD and power going to HDD directly from PS. Make sure your fans are working. Vegas uses 3. I think seattle is supposed to have 2.

pcb-1.jpg
 
Last edited:
Was looking for pictures for a Blitz 99 4-player.
I am aware that there are certain connectors that are not wired in.
Just want to make sure that I have everything where it is suppose to be connected.
 
I think jamma, i-40, fans, and HDD power are all thats needed. Seattle boards supports additional speaker for vapor trx seat, but I don't think I have ever seen it connected on a blitz. But since I don't own a dedicated 99, I can not say for sure.
 
Well I'll get pics tomorrow when the sun is out..

Blitz does support 2 speakers, a left and right channel so i'll have to check how those are ran also to know if it's from the jamma harness or not.

I have the Seattle board 4 player version so I should be able to help out in the long run.
 
As a man of my word, here's a small album of pictures I took.. They aren't the greatest and hopefully you get an idea of what's what.. Also excuse the crazy camera angles, I was working in a tight limited space holding a flashlight.

Since moving the cab, it's thrown off the polarity's of both machines I have in the garage. Now I gotta borrow a degaussing coil... both monitors are way off.. Ah well that's life..

http://s573.photobucket.com/albums/ss172/RenegadeFred/BlitzWiring/
 
Last edited:
I appreciate the photos Fred, but a lot of them are out of focus.
Again I really, really appreciate the effort, but can you either photograph the areas again or does someone else possibly have some photos of the inside of their cabinet lying around?
 
Again words cannot describe how appreciative I am for you taking the photographs.
Can anyone else chime in with any help?
 
Back
Top Bottom