Can someone Confirm these measurements???

bbeckwith

Active member
Joined
Apr 13, 2012
Messages
1,953
Reaction score
17
Location
Kansas City, Missouri
Below I attached a diagram or w/e it's called lol.

I took these measurements off a 3D rendered Rampage machine. I need someone with a Bally Midway upright Rampage machine to confirm these are correct or help me fix the measurements. I will be doing a front version as well once the side is 100% confirmed.

I want to make a guide similar to Jakobuds so someone in the future can use this if they want to build their own Rampage Cab like me :)
 

Attachments

  • Dimensions_Test.jpg
    Dimensions_Test.jpg
    34.8 KB · Views: 15
gwarble, Thanks a bunch. No rush my friend. PM me if it is easier than finding this thread. I have no idea how many people want to build this cab, but it could help others in the future so I don't mind making the guide.

I will be building mine from scratch and want it as close as I can get to original.

Thanks.
 
Did you start with a gozer sketchup model? the general shape looks off (front bottom isnt slanted, more like a ms pac front; vertical then angled at the cp)

You should try to find a local one to copy for the rest of the cab's details, but i'll try to take a square on picture for you with a couple dimensions so you can copy the radii and angles right
 
Last edited:
gwarble

The reason the angle from bottom to the under side of the CP is not very angled is because I used a picture I found on google, outlined it, and it was just not a good angle that showed the diagonal the CP takes. The measurement should still be close, I just need to redo the outline of the machine.

And yes the measurements were from the Gozer sketchup.

I outlined the attached picture, hence the not as slanted bottom front.
 

Attachments

  • DSC00299.jpg
    DSC00299.jpg
    91.7 KB · Views: 10
Last edited:
Back
Top Bottom