can I plug my g07 fbo 13" chassis into a 19" tube to test it?

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,144
Reaction score
2,593
Location
Eureka, California
can I plug my g07 fbo 13" chassis into a 19" tube to test it?

just to rule in/out the tube on the 13" being bad.
 
I believe the neck sockets are different.....
19" = CR23
13" = CR28

Edward

Check the pinout. If it's a matter of red being where green is supposed to be, and vice versa, then I'd go for it. If other things are different, I would not.
 
I believe the neck sockets are different.....
19" = CR23
13" = CR28

Edward

funny you mention that, I just did a rejuve on the tube with a 23 to 28 adapter. should have been thinking.
 
Check the pinout. If it's a matter of red being where green is supposed to be, and vice versa, then I'd go for it. If other things are different, I would not.

The pinout is different (besides colors)....I know the heater is on different pins.

Edward
 
Back
Top Bottom