Can anyone work on and Test a NAMCO POLE POSITION BOARD SET??

tatom

Member
Joined
Oct 26, 2011
Messages
360
Reaction score
2
Location
Oregon
Can anyone work on and Test a NAMCO POLE POSITION BOARD SET??

Does anyone have the ability to work on and test a Namco Pole Position Board Set. Does anyone have a working Namco Pole Position Board set that they would sell? I have 2 board sets and both have different problems see pictures. Any ideas the boards very clean and don't look like any work has ever been done. They will not go into test mode what you see is what I get. The time and date on my camera where never set the pictures were taken about a month ago.
 

Attachments

  • CIMG2443.jpg
    CIMG2443.jpg
    93.4 KB · Views: 23
  • CIMG2444.jpg
    CIMG2444.jpg
    98.7 KB · Views: 22
Last edited:
$189? Isn't that about what a working boardset goes for anyway?

Dick Millikan is the go to guy for this. I actually sent him three non-working boardsets and he fixed and returned one.

Darren Harris
Staten Island, New York.
 
The NAMCO POLE POSITION BOARD SET is different from the ATARI POLE POSITION.
 
i know of Atari version

Might need more than pcb repaired.
audio reg might be bad. Therefore blowing out pcb.
 
The second board looks like ROM issues. I would start by cleaning the boards, removing all the socketed chips, cleaning the legs and sockets, and tying all the test points together to eliminate voltage drops.

The first board looks like it's trying to tell you there is a problem with RAM 31
 
does anyone have the ability to work on these boards?
 
Back
Top Bottom