Cab-Mashing? mounting a different CP to AN HS5

trueno92

New member
Joined
Jul 7, 2015
Messages
184
Reaction score
5
Location
aurora, Ontario, Canada
wanted to know if anyone had tried this:

I am going to be receiving a Midway 4p CP for NBA jam, as I have not been able to find a the 4p HS5 panel.

Has anyone tried mating these 2 beasts? I dont' mind hacking up the underside of the CP a bit as long as its secure and I think it would fit but I don't have the dimensions of the cutout underside of the CP and google doesn't either.

I am planning to extend the MDF drawer that goes into the HS5 to connect to the bottom of the Midway CP and latch up the top of it...

Looking for pics if anyone has treaded this path before me!
 
the dynamo hs5 cab was only intended as a 2p universal cab.... never meant for 4p from factory... now with that being said. you can like you said extend that bottom panel from hs5 out to point where you can just bolt the midway cp up to it..
 
Thanks for chiming in.
I have a 4p midway box on the way and its NBA jam decaled so km quite excited - just hope it has both 3p/4p cables but yah I'm gonna have to wait and see what's in there.

I figured some Ops back in the day would have cashed in on NBA jam and tried to do this conversion. I'm wondering about cp overall height so I think the cp may need to be double hinged at the bottom where it bolts to the drawer.

Or I just use carriage bolts and mount some stamped metal brackes inside the hs5....
 
Back
Top Bottom