Cab conversion nintendo style

martimagico

Member
Joined
Jun 13, 2011
Messages
387
Reaction score
0
Location
Lemoore, California
i have a vs. super mario bros cabinet.
it was originally a popeye cab so the monitor has always been horizontal
my question is, what do i need to convert it to a DK style vertical mounted screen. i will most likely go with a LCD but would like to mount it the same manner and original angle as a DK cab, thanks!
 
You need to find a set of Nintendo vertical mount brackets. I would put a WTB in the wanted section. They do pop up on occasion. However, if you are going with an LCD, I would just fab something up in the basic style of the factory mounts. Basically a bracket mounts to the bottom near the control panel and a crossbar attaches between two L brackets at the top

Here are some pics (pics not mine):

hardware_monitor.jpg

attachment.php
 
Last edited:
While LCDs sound like a great idea, they suck. A Sanyo 20EZ is a great monitor and almost anything wrong with then is just a cap kit.
 
Back
Top Bottom