Bypassing a bill acceptor question

bottlejunkie

Well-known member

Donor 2011, 2015
Joined
Jun 29, 2010
Messages
10,195
Reaction score
1,341
Location
houston, Texas
So i got this cab that has had the bill acceptor removed and no coin mechs. Theres a connector for the non-exsiting bill mech but i dont know how to credit the machine without the bill acceptor? will post pics of the connector later,is it possible to hack it and put a button or a switch?
 
No coin mechs - are the coin switches still there ?

Bill validator - name of game it was might help.

If a MARS unit was in there, 9 pin square connector, the bill validator side MARS used the orange and brown wire for coin switch pulses.

And again if a MARS unit could plug into it, holding the connector so you are looking at where the validator connector plugs into/ latch on top where the bill validator connector latches onto it, the bottom two right pins would be the orange and brown wire spots.

Stay away from the white and black wires - 110 AC.

LTG :)
 
the bottom two right pins would be the orange and brown wire spots.

Stay away from the white and black wires - 110 AC.

LTG :)

there orange and black in those positions,i peeled back the casing(pin connector still there) and touched the 2 together and voila credit! im going to install a credit button today. the printer works great but the camera is black gonna see about that today,maybe is not plugged in. thanks for the tip.
 
Back
Top Bottom