BurgerTime Video Issue

Bee423

Well-known member

Donor 2020
Joined
May 23, 2020
Messages
1,577
Reaction score
552
Location
Church Hill, Tennessee
Hey guys, got a BurgerTime board that appears to play fine but has the horizontal lines. Any idea?

Thanks!
 

Attachments

  • IMG_3054.jpeg
    IMG_3054.jpeg
    602.2 KB · Views: 31
Have you tried just cleaning the board edge?

Mine does this too. I eventually get a full white screen. I replaced the edge connection, pulled the ROMs: cleaned the legs, and reinstalled them. All with no change.
I'm interested to see if anyone has any better ideas.
 
I haven't tried anything yet other than checking voltages and a different power supply. I was going to try reseating the ROMs next. I've also been told it looks like a RAM issue.
 
Did you make any progress? I'm to the point I'm looking for someone to send the board to. PCB repair, beyond the simple stuff, is not my cup of tea.
 
I did not am I'm in the same boat as you...I'm ready to send it off to someone for repair. So far I haven't found anyone that works on them.
 
Yeah I've hit a couple people up and it isn't a game they work on or want to. One dude told me to get a Midway to JAMMA switcher and throw in a 60-in-1. I'm not quite to that point… but close. 😅
 
Oh boy, lets don't go there lol. This is my backup board so I'm probably in a little better spot. These boards must be more difficult to work on. Problem is, I bought this from Quarter Arcade as a working board and it cost about $450....so I'm pretty disappointed to say the least.
 
Back
Top Bottom