Burgertime (Midway) Power Supply Pinout

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Anyone have access to one, with wire colors listed? My coin lights aren't working, even with new bulbs, so I went to the source of the power to investigate. Seems I have a broken wire near the larger connector, the wire is yellow/red and just broken off at the pin level. Problem is, I am not sure where it is supposed to go, as several of these pins have at least 2 wires coming out of them and no obvious break can be seen coming out of any of the pins. Can anyone help?
 
Page 76 of the manual shows that the coin door lights come off of the 22-pin CONN 1 of the power supply bd:

Pin 3 - +12 (Orange-Black)
Pin 11 - Return (Gray-Red)

Don't see a yellow-red wire coming off that board...
 
Page 76 of the manual shows that the coin door lights come off of the 22-pin CONN 1 of the power supply bd:

Pin 3 - +12 (Orange-Black)
Pin 11 - Return (Gray-Red)

Don't see a yellow-red wire coming off that board...

Nice. Well I have 2 of them. Maybe they are yellow/brown. I wasn't sure if the broken wire was the culprit or not, but I had really hoped it was. Now that I see the schematic I will check those 2 wires, if they check out, what parts in that circuit need replaced?
 
Back
Top Bottom