Burgertime(DECO) Newbie Needs Major Help.Where to Begin?!

[Schaefnutz]

-

Ok so I wound up getting the 60 in 1 kit off ebay since it was cheap

I now have my wiring harness and a new power supply and few yellow and white buttons.

This should get interesting

I have no idea how to get power going into the power supply lol

 

[Schaefnutz]

update 9/15

Ok so we did some wiring stuff with Jamma Harness and power supply

We hooked up some of the wires with the existing power supply with the new power supply

We were able to flip the power switch and hear the crackle of the monitor coming on. Theres is a faint glow in the tube in the back (at the end of it) and it seems as if the monitor shows a light glow of an all black screen

With the harness we tried testing other components...we got the speaker to make a crackle noise. We also had a Time Killers jamma board and it had a yellow light on the board that came on but we were not able to get the picture and sound to come through on the machine.

We test the light for the marquee on top but no luck, although we shook the long bulb and it didn't seem dead.

Any suggestions from here? We might try a different board or something.

Can anyone say whether that power supply and harness will work? I still haven't gotten any feedback on it

 

[Schaefnutz]

0 replies

*bump**bump**bump**bump*

 

[mrbill2084]

read this. look at the wiring diagram. pull anyting that is not needed and copy what you see in the pic exactly..

You have the isolation, the filter, and the power distribution block. Start at the power cord and start filling in the wiring..

http://www.therealbobroberts.net/buildit.html