Bump n Jump Jamma Conversion in KC

heilxmq

New member
Joined
Jul 18, 2009
Messages
54
Reaction score
0
Location
Missouri
I'm working to Jamma'tize a Bump n Jump. I have a convertor like this:

http://www.quarterarcade.com/Game.aspx/531

I understand how this would hook up to my existing Jamma adapter. It seems pretty straight forward.

However, I wasn't sure about power? Can I use the same switcher that is wired to my Jamma cabinet? I didn't want to try and power up anything until I knew for sure.

I also have a power supply conversion kit for Burger Time/Bump n Jump/Gorf.... but do I even need this? If I do, I'm not really clear how I would wire in the pin-outs from the conversion kit.

Any input is greatly appreciated. If anyone is in Kansas City and wants to help me get this going... I'll gladly provide beer or other arcade parts in return for help.

-Charlie
 
FYI, it is working now. All I needed was the JAMMA convertor.

I'm just missing the color yellow? I'm guessing this is something to do with the sync or H/V? **Update, my R G B cables are not on very well. Need to fix this and then I think I'm in business**

In the convertor there's a blue cable that can be disconnected. I was guessing I needed to disconnect it because on Burger Time it runs to -5 but on Bump n Jump that pin is GND. That's the way I'm setup now at least.

***Final Edit***
It works. Fixing the R G B cables resolved everything. You do have have to disconnect the blue cable that goes to -5 for Burger Time but just to GND for Bump n Jump. Only thing left for me to do is get a little volume adjustment in place. The speakers and sound blast right now.
 
Last edited:
Back
Top Bottom